[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
[1]. Yan J, Jin S, Zhang W, Guo Z, Yuan Y. Investigation of wall temperature effects on fuel spray impingement and combustion characteristics in air-cooled diesel engines during cold start[J]. Energy 2025;335: 138311. (JCR Q1, TOP期刊, IF: 9.4)
[2]. Yan J, Fu L, Zhang W, He X, Jin S, Guo Z, et al. Research on the effects of split injection on diesel engine spray impingement and fuel film under cold-start conditions[J]. Fuel 2025; 395: 135182. (JCR Q1, TOP期刊, IF: 7.5)
[3]. Yan J, Zhang W, He X, Yu Y, Jin S, Xu K, et al. Numerical simulation study of spray wall impingement and adhered fuel film under different altitude conditions during cold start of diesel engines[J]. Applied Thermal Engineering 2025; 269: 126107. (JCR Q1, TOP期刊, IF: 6.9)
[4]. Yan J, Zhang H, Yu Y, Jin S, Zhang W, Liu Y, et al. Research on the oscillating cooling characteristics of small-bore pistons in opposed piston two-stroke engines for auxiliary power units[J]. Applied Thermal Engineering 2025;278:127267. (JCR Q1, TOP期刊, IF: 6.9)
[5]. Yan J, Cao Z, Zhang W, Jin S, Guo Z, Yuan Y, et al. Research on the microscopic characteristics of low-cycle-fatigue and creep coupling in cast aluminum alloys for cylinder heads[J]. International Journal of Fatigue 2025; 197: 108952. (JCR Q1, TOP期刊, IF: 6.8)
[6]. Yan J, Tong Q, Zhang W, Yuan Y, Jin S, et al. Research on accelerated thermal fatigue testing and life prediction of Al-Si alloy pistons under start-stop cycles[J]. International Journal of Fatigue 2025; 191: 108677. (JCR Q1, TOP期刊, IF: 6.8)
[7]. Yan J, Jin S, Zhang W, Guo Z, Liu Y, et al. Influence of injection timing on wall film formation and low-temperature combustion in an air-cooled diesel engine under cold-start conditions[J]. Case Studies in Thermal Engineering 2025; 75: 107137. (JCR Q1, IF: 6.4)
[8]. 颜杰, 张卫正, 殷勇, 等. 燃油喷雾撞击高温壁面的形态特征研究[J]. 北京理工大学学报, 2023, 43(07): 702-711.
[9]. 颜杰, 董全, 任晓光, 等. 基于LSD技术的柴油喷雾特征直径研究[J]. 哈尔滨工程大学学报, 2022, 43(01): 91-98.
[10]. Liu Y, Zhang H, Yu H, Yan G, Yan J, He X. Study on the macroscopic and microscopic characteristics of flash boiling spray of liquid ammonia[J]. Fuel 2026; 408: 137696.
[11]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Liu Y, Yan J. Dynamic characteristics of the droplet impact on the ultracold surface under the engine cold start conditions[J]. Fluid Dynamics 2024; 59(3): 594-611.
[12]. Jin S, Zhang W, Guo Z, Yuan Y, Shi Z, Yan J. Experimental study on a water droplet impacting on the heated glycerol surface[J]. Fluid Dynamics 2024; 58(8):1502-1516.
[13]. Jin S, Zhang W, Guo Z, Yuan Y, Yan J, Liu Y. Experimental investigation of fuel film characteristi- cs after spray impacting on ultra-cold surface[J]. Journal of Applied Fluid Mechanics 2025; 18(6): 1550- 1562.
[14]. 靳爽, 张卫正, 郭镇瑶, 颜杰, 等. 壁面温度对燃油液滴撞壁后飞溅规律影响的试验研究[J]. 工程热物理学报, 2025, 46(08): 2630-2640.
[15]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油喷雾撞击高温壁面的瞬态传热特性[J]. 内燃机学报, 2024, 42(06): 481-488.
[16]. 郭镇瑶, 张卫正, 靳爽, 颜杰, 等. 柴油液滴撞击热壁面的动态行为特性[J]. 工程热物理学报, 2022, 43(10): 2782-2789.
[17]. 张卫正, 余云乐, 靳爽, 颜杰, 等. 燃油液滴撞击对液膜厚度和温度影响的试验研究[J]. 北京理工大学学报, 2025, 45(05): 460-470.
[18]. 王洪悦, 董全, 颜杰, 等. 喷气策略对多点喷射天然气发动机燃烧及排放的影响[J]. 西安交通大学学报, 2022, 56(02): 57-65.
