赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
赵长财,董国疆,肖宏,任学平,郝海滨.有限长薄壁管破裂极限分析[J].中国机械工程, 2007, 18(12)，EI收录；
赵长财，肖宏，董国疆,等.管材屈曲和起皱分析[J]，中国机械工程，2007, 18(11). EI收录；
赵长财,任学平,董国疆,等.管材固体颗粒介质成形新工艺及其塑性理论研究[J]，中国机械工程，2007，18(16), EI收录；
赵长财，李晓丹，任学平，等.固体颗粒介质传压性能的数值模拟和试验研究[J]，塑性工程学报，2007，14(5). EI收录；
李志波，董国疆，吴树亮，等.12.5MN双柱快锻液压机机架的有限元分析[J].锻压技术，2008, 4；
王银思，赵长财，孙超，董国疆.固体颗粒介质成形工艺几何参数研究[J].塑性工程学报, 2008, 15(5). EI收录；
赵长财，李晓丹，董国疆，王银思.板料固体颗粒介质成形新工艺及其数值模拟[J]，机械工程学报，2009，45(6). EI收录；
董国疆，赵长财，曹秒艳，等.高压状态下固体颗粒介质侧压应力系数试验[J].塑性工程学报，2010, 17(3)；(1B)
董国疆，赵长财，曹秒艳,等.管板材SGMF工艺传压介质的物理性能试验[J].塑性工程学报, 2010, 17(4)；(1B)
董国疆，赵长财，曹秒艳，郝海滨、杨东峰.圆筒形件固体颗粒介质成形壁厚及变形规律研究[J].中国机械工程，2010, 21(16)；
杨东峰,董国疆,赵长财,郝海滨. AZ31B镁合金薄板热拉伸显微组织试验研究[J].塑性工程学报, 2011, 18(2): 76-80. (1B)
曹秒艳,董国疆,赵长财.基于离散元法的固体颗粒介质传力特性研究[J].机械工程学报, 2011, 47(14): 62-69. (1A, EI收录)
Miao-Yan CAO, Chang-Cai ZHAO,Guo-Jiang DONG. Research on Deep Drawing of Light Alloy Sheet Based on SGMF Technology.2014 International Conference on Mechanism Science and Control Engineering (MSCE 2014),ISBN: 978-1-60595-183-6(EI收录)
杨盛福,赵长财,贾向东,孙超,董国疆.基于有限元的轴类件浮动模局部成形新工艺[J].塑性工程学报, 2012, 19(4): 62-67. (1B)
杨盛福,赵长财,杜冰,曹秒艳,董国疆,李旺.基于有限元分析的CNG气瓶热旋压机本体机构设计与优化[J].锻压技术, 2012, 37(6): 47-52.
赵长财,杨盛福,刘培培,董国疆,曹秒艳,郝海滨.大型模锻液压机平衡系统原理及其理论研究[J].机械工程学报, 2012, 48(10): 82-89. (1A, EI收录)
赵长财,曹秒艳,肖宏,董国疆,郝海滨.镁合金板材的固体颗粒介质拉深工艺参数[J].中国有色金属学报, 2012, 22(4): 991-999. (1A, EI收录)
曹秒艳,赵长财,董国疆.镁合金板材颗粒介质拉深工艺参数数值模拟[J].中国有色金属学报, 2012, 22(11): 2992-2999. (1A, EI收录)
董国疆,赵长财.盒形件固体颗粒介质板材成形工艺研究[J].机械工程学报, 2012, 48(22): 72-79. (1A, EI收录)
曹秒艳,赵长财,董国疆,郝海滨.基于固体颗粒介质成形工艺筒形件拉深力学分析[J].机械工程学报, 2013, 49(2): 42-48. (1A, EI收录)
CAO Miao-yan, ZHAO Chang-cai, WU Li-jun, DONG Guo-jiang. Lubricant Research on SGMF of Magnesium Alloy Sheet[J]. Advanced Materials Research, v675, p311-316, 2013(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Flexible-die forming process with solid granule medium on sheet metal[J]. The Chinese Journal of Nonferrous Metals, 2013, 23(9): 2666-2677. (EI/SCI收录)
DU Bing, ZHAO Changcai, DONG Guojiang, YA Yuanyuan. Study on thin-walled tube forming by solid granule medium forming[J]. ICIC Express Letters, 2014, 8: 2649-2654.(EI收录)
DONG Guo-jiang, ZHAO Chang-cai, CAO Miao-yan. Process of back pressure deep drawing with solid granule medium on sheet metal[J]. Journal of Central South University, 2014, 21(7): 2617-2626.(EI/SCI收录)
杜冰,赵长财,刘一江,董国疆.管材内高压成形变形模式研究[J].机械工程学报, 2014, 50(16): 126-134. (1A,EI收录)
杜冰,赵长财,李雪峰,何昕,董国疆.高温合金凸环管件固体颗粒介质成形工艺[J].中国有色金塑学报, 2014, 24(7): 1721-1729.(1A,EI收录)
DONG Guojiang, ZHAO Changcai, PENG Yaxin, LI Ying. Hot granules medium pressure forming process of AA7075 conical parts[J]. Chinese Journal of Meghanical Engineering, 2015, 28(3): 580-591.(EI/SCI收录)
袁荣娟,杨盛福,赵长财,董国疆. AA7075-T6圆筒形零件热态颗粒介质压力成形过程的力学分析[J].中国机械工程, 2015, 26(23): 3240-3248.(1A)
Dong Guojiang, Zhao Changcai, Ya Yuanyuan, Zhao Jianpei. Discrete Element and Finite Element Coupling Simulation and Experiment of Hot Granule medium Pressure Forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2015, 25(12): 4089–4101.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, ZHAO Chang-cai, DONG Guo-jiang, YANG Sheng-fu. Instability analysis of free deformation zone of cylindrical parts based on hot-granule medium-pressure forming technology[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2016, 26(8): 2188-2196.(EI/SCI收录JRC分区Q2)
CAO Miao-yan, PENG Yan-xin, ZHAO Chang-cai, DONG Guo-jiang, DU Bing. Frictional characteristics of granular system under high pressure[J]. Journal of Central South University, 2016, 23(5): 1132-1141.(EI/SCI收录)
DONG Guo-jiang, ZHAO Chang-cai, ZHAO Jian-pei, YA Yuan-yuan, CAO Miao-yan. Research on technological parameters of pressure forming with hot granule medium on AA7075 sheet[J]. Journal of Central South University, 2016, 23(4): 765-777.(EI/SCI收录)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳.加载路径对AA5083管件热态非金属颗粒介质成形性能的影响[J].中国机械工程, 2016, 27(18): 2547-2555.(1A)
陈晓华,赵长财,董国疆,杨卓云,曹秒艳. AA5083管件颗粒介质非均匀内压温热胀形工艺性能解析[J].中国机械工程, 2016, 27(24): 3357-3381.(1A)
DONG Guo-jiang, YANG Zhou-yun, ZHAO Jian-pei, ZHAO Chang-cai, CAO Miao-yan. Stress-strain analysis on AA7075 cylindrical parts during hot granule medium pressure forming[J]. Journal of Central South University, 2016, 23(11): 2845-2857. (EI/SCI收录)
Dong Guo-jiang, Bi Jing, Du Bing, Chen Xiao-hua, Zhao Chang-cai. Research on AA6061 tubular components prepared by combined technology of heat treatment and internal high pressure forming[J]. Journal of Materials Processing Technology, 2017, 242:126-138. (EI/SCI收录;JRC分区Q1材料类ESI)
杨卓云,赵长财,董国疆*,张鑫,陈晓华.凸环管件颗粒介质内高压成形工艺理论解析[J].中国机械工程, 2017, 28(7): 867-876.(1A，EI收录)通信作者
Bi Jiang, Zhao Chang-cai, Bi Meng-meng, Du Bing, Chen Xiao-hua, DONG Guo-jiang*. Heat treatment and granule medium internal high-pressure forming of AA6061 tube[J]. Journal of Central South University, 2017, 24(5):1040-1049.(EI/SCI收录)通信作者
毕江,赵长财,杜冰,陈晓华,董国疆*. AA6061铝合金正方形截面管胀形工艺研究[J].中国机械工程, 2017, 28(12): 1491-1498.(1A，EI收录)通信作者
曹秒艳,左苗苗,王鹏,赵长财,董国疆.基于非局部摩擦理论的颗粒介质传力特性研究[J].机械工程学报, 2017, 53(13): 136-142. (1A，EI收录)
董国疆,陈孟杰,朱良金,杜建,刘志雷. Q235/AA5052复合凸环管颗粒介质胀形工艺研究[J].中国机械工程, 2018, 29(7): 870-878.(1A，EI收录)
Bi Jiang, Zhao Chang-cai, Du Bing, Guo Qing-bo, DONG Guo-jiang*. Formability and strengthening mechanism of AA6061 tubular components under solid granule medium internal high pressure forming[J]. Transactions of Nonferrous Metals Society of China (English Edition), 2018, 28(2):226-234.(EI/SCI收录JRC分区Q2)通信作者
Yang Zhuo-yun, Zhao Chang-cai, Dong Guo-jiang, Du Bing, Zhang Li. Analytical model of corner filling with granular media to investigate the friction effect between tube and media[J]. International Journal of Advanced Manufacturing Technology, 2018:1-14.(EI/SCI收录JRC分区Q2工程类ESI)(SCI: 000445800600017, EI收录号: 20183405713167)
朱良金,陈孟杰,王威,杜飞,董国疆*.基于三维成形极限应力图的AA6061挤压管材成形性能分析[J].中国机械工程, 2019, 30(11): 1367-1377.(1A，EI收录)通信作者
董国疆,韩杰,颜峰,郎玉玲.汽车零部件疲劳分析载荷谱加速编辑法研究[J].中国机械工程, 2020, 31(05): 543-552.(1A，EI收录)
杨卓云,赵长财,董国疆*,陈光,朱良金,杜冰.基于Lou-2013韧性断裂准则5182铝板成形极限研究[J].机械工程学报, 2019, 55(16): 47-57.(1A，EI收录)通信作者(EI收录号: 20193907472634)
[50]董国疆,杜飞,王威,郎玉玲.考虑低载荷强化效应的汽车转向节疲劳分析[J].汽车工程, 2020, 42(3): 406-415.(1A，EI收录)
Yang Zhuoyun, Zhao Changcai, Dong Guojiang*, Chen Zhiwei, Sun Yufei, Jia Xiangdong. Forming limit prediction of AA7075-T6 sheet based on ductile fracture criterion and the error analysis of parameters calibration. International Journal of Material Forming, 2020:1-19. (网络首发) (SCI:未入库, EI收录号: 20200408071988)通信作者
董国疆,杜飞,王威,张龙生.基于多体动力学的车辆悬架控制臂载荷谱混合分布外推研究[J].中国公路学报, 2020, 33(7): 186-196.(1A，EI收录)
Dong Guojiang, Chen Zhiwei, Yang Zhuoyun, Fan Bocheng. Comparative study on forming limit prediction of AA7075-T6 sheet with MK model and LouHuh criterion[J]. Transactions of Nonferrous Metals Society of China, 2020, 30(6):1463-1477.
