1996.9-2000.7大庆石油学院机械工程学院机械设计及制造专业 工学学士
2001.9-2004.4大庆石油学院机械工程学院安全技术及工程 工学硕士
2004.9-2008.1 燕山大学机械工程学院机械设计及理论专业 工学博士
2008.01-2010.12燕山大学车辆与能源学院石油工程系 助教/讲师
2010.12-2013.03燕山大学车辆与能源学院石油工程系 副教授
2013.03-2018.12燕山大学车辆与能源学院 石油工程系 副教授(系主任)
2017.09-2018.09美国佐治亚理工学院 电子与计算机工程系 访问学者
2018.12-2021.3燕山大学车辆与能源学院石油工程系教授(系主任)
2021.3-至今燕山大学车辆与能源学院石油工程系教授
2019.11-至今 燕山大学机械工程学院 机械设计及理论专业 博士生导师
近年主持或完成的主要科研项目有:
(1)河北省高等学校科学研究项目:复杂环境下油气管道健康智能诊断与剩余寿命预测平台关键技术研究(2025-2027)。
(2)燕山大学基础创新培育项目:油气输送管道多传感融合故障检测与智能预警研究(2025-2026)
(3)省、市重点实验室开放课题:基于机器视觉与深度学习分步识别算法的钢材表面质量缺陷检测研究(2024-2026)
(4)国家自然科学基金:噪声背景下大型井架钢结构微损伤识别及其在风载荷下的安全评估(2019-2022)
(5)河北省科学技术研究与发展计划项目:基于噪声利用的风电机组传动链设备早期微弱故障识别与智能诊断研究(2021-2024)
(6)河北省自然科学基金面上项目:基于深度学习和多尺度时频分析的风电机组故障特征提取与智能诊断研究(2020-2023)
(7)河北省高层次人才资助项目:大型承载钢结构微损伤检测与诊断关键技术研究(2019-2022)
(8)引进留学人员资助项目:基于多传感信息融合和深度学习算法的大型承载钢结构智能诊断研究(2019-2021)
(9)国家自然科学基金青年基金:在役井架钢结构安全评估与剩余寿命预测理论研究(2012-2014)
(10)河北省自然科学基金面上项目:大型钢结构早期、局部损伤识别与健康监测技术研究(2015-2017)
(11)河北省自然科学青年基金项目:在役井架钢结构多损伤检测、诊断与安全评估理论研究(2011-2013)
(12)河北省高等学校科学技术研究重点项目:含早期、局部损伤的大型钢结构在极限风载、地震载荷下的安全评(2015-2018)
(13)河北省高等学校科学技术研究青年项目:大型承载钢结构安全评估及剩余寿命预测理论研究(2010-2012)
(14)国家自然科学基金面上项目:变工况大型旋转机械多重故障耦合机理及早期微弱故障特征提取与诊断研究(2015-2018)
(15)国家自然科学基金青年基金:多因素作用下高速板带轧机传动系统非线性扭振动力特性与稳定性研究(2011-2013)
科研获奖情况:
(1)2016年获得秦皇岛市科技进步奖二等奖。
(2)2019年获得河北省科技进步二等奖。
(3) 2017年获河北省“三三三人才工程”第三层次人选。
专利情况:
(1)韩东颖,魏世民,时培明,魏庆,王斌,高凯.基于IMF瞬时能量曲率差值的井架钢结构损伤识别方法, 2019-9-27,中国, ZL201610538773.4 (专利)
(2)韩东颖,时培明,张莹,等.大型转动设备扭振模拟软件V1.0,计算机软件著作权,登记号:2014SR114325
(3)韩东颖,时培明,张莹,等.大型转动设备扭振抑制软件V1.0,计算机软件著作权,登记号:2014SR155551
(4)韩东颖,王玉玺,朱国庆,黄岩,曹立志,田伟.自动巡航履带爬行井架损伤检测机器人, 2022-9-27,中国, ZL 2021 2 3250390.2 (专利)
(6)韩东颖,朱国庆,黄岩,王浩,曹立志,崔宇,田伟,邵晨.井架动力测试传感器取放机器人,2022-4-5,中国, ZL 2021 2 2048783.9 (专利)
(7)韩东颖,黄岩,朱国庆,曹立志,崔宇,田伟,邵晨.一种小管径架空压力管道裂缝检测机器人,2022-9-27,中国, ZL 2022 2 1233404.1 (专利)
(8)韩东颖,朱国庆,黄岩,曹立志,李可欣,王玉玺,李岳峰,葛文泰.一种液压型石油井架防倾倒装置, 2022-4-8,中国, ZL 2021 2 2856918.4 (专利)
(9)韩东颖,张宇,时培明.风电机组齿轮箱故障分析数据分析配置软件V1.0, 2021SR1425959,原始取得,全部权利, 2021-3-10 (软件著作权)
(10)韩东颖,李可欣,黄岩,朱国庆,一种检测海洋平台导管架腐蚀情况的水下机器人.2023-3-7,中国, ZL 2022 2 1627614.9 (专利)
专著情况:
(1)石油矿场机械石油工业出版社2012年 高等学校规划教材2/3
(1)Dongying Han, Yu Zhang, Yue Yu, Jinghui Tian, Peiming Shi. Multi-source heterogeneous information fusion fault diagnosis method based on deep neural networks under limited datasets, Applied Soft Computing, 154(2024)111371.(中科院一区,SCI收录)
(2)Jinghui Tian, Dongying Han, Hamid Reza Karimi, Yu Zhang, Peiming Shi. A universal multi-source domain adaptation method with unsupervised clustering for mechanical fault diagnosis under incomplete data, Neural Networks, 2024, 173 106167.(中科院一区、SCI收录,通讯作者)
(3)Yu Zhang,Dongying Han,Peiming Shi. Semi-supervised prototype network based on compactuniform-sparse representation for rotating machinery few-shot class incremental fault diagnosis, Expert Systems with Applications, 2024, 255: 124660.(中科院一区、SCI收录,通讯作者)
(4)黄岩,韩东颖,朱国庆,李岳峰,李可欣.基于时域多参数信息融合与机器学习算法的井架钢结构损伤识别.计量学报, 2024,45(5): 698-705. (1A,通讯作者)
(5)朱国庆,韩东颖,米振涛,杨衍帅,刘艳飞,刘天昱.Signal Extraction and Damage Identification of Derrick Steel Structure Under Noise Background, ACM International Conference Proceeding Series.Qingdao, July 19–21, 2024,77-83(EI收录,通讯作者)
(6)朱国庆,韩东颖,黄岩,李岳峰,葛文泰.噪声与振动控制. 2024, 44(2): 108-113. (中文核心,通讯作者)
(7)田警辉,韩东颖,Hamid Reza Karimi,张宇,时培明. Deep learning-based open set multi-source domain adaptation with complementary transferability metric for mechanical fault diagnosis[J]. Neural Networks, 2023, 162: 69-82.(中科院一区、SCI收录,通讯作者)
(8)张宇,韩东颖,田警辉,时培明. Domain adaptation meta-learning network with discard-supplement module for few-shot cross-domain rotating machinery fault diagnosis[J]. Knowledge-Based Systems, 2023, 268: 110484.(中科院一区、SCI收录,通讯作者)
(9)黄岩,韩东颖,朱国庆,时培明.基于多特征融合与机器学习的井架钢结构智能诊断.科学技术与工程.2023,23(25):10800-10807.(中文核心)
(10)田警辉,韩东颖,李梦迪,时培明. A multi-source information transfer learning method with subdomain adaptation for cross-domain fault diagnosis[J]. Knowledge-Based Systems, 2022, 243: 108466.(中科院一区、SCI、EI收录,通讯作者,高被引论文)
(11)韩东颖,崔宇,黄岩,朱国庆,阳鑫军,郑黎明. Oil derrick damage identification based on wavelet packet analysis and deep learning algorithm. 2022 4th International Conference on Intelligent Control, Measurement and Signal Processing, p 1040-1044, 2022( EI)
(12)田警辉,韩东颖,肖立峰,时培明. Multi-scale deep coupling convolutional neural network with heterogeneous sensor data for intelligent fault diagnosis[J]. Journal of Intelligent & Fuzzy Systems, 2021, 41(1): 2225-2238.(SCI、EI收录)
(13)韩东颖,田警辉,薛朋,时培明. A novel intelligent fault diagnosis method based on dual convolutional neural network with multi-level information fusion. Journal of Mechanical Science and Technology, 2021, 35: 3331-3345.(SCI,EI收录)
(14)韩东颖,邵晨,曹立志,阳鑫军,郑黎明. Damage identification of oil derrick steel structure based on energy entropy difference[C]. Tianjin: 2021 International Conference On Signal Processing And Communication Technology, 2021: 121781S.(EI收录)
(15)韩东颖,罗皓,孔祥西,时培明.基于HVD包络谱瞬态能量曲率的井架钢结构损伤识别.振动与冲击, 2021, 40(2): 135-140,147.(1B,EI收录)
(16)Dongying Han, Peiming Shi. Study on the mean first-passage time and stochastic resonance of a multi-stable system with colored correlated noises. Chinese Journal of Physics,2021(69):98-107.(SCI收录)
(17)Dongying Han, Xiaoci Guo, Peiming Shi. An intelligent fault diagnosis method of variable condition gearbox based on improved DBN combined with WPEE and MPE. IEEE Access .2020(99):1-1.(SCI收录)
(18)Dongying Han, Na Zhao, Peiming Shi. Gear fault feature extraction and diagnosis method under different load excitation based on EMD PSO-SVM and fractal box dimension. Journal of Mechanical Science and Technology,2019,33(2):487-494.(SCI收录)
(19)Dongying Han, Kai Liang, Peiming Shi. Intelligent fault diagnosis of rotating machinery based on deep learning with feature selection. Journal of low frequency noise, vibration and active control 2020,39(4).(SCI收录)
(20)Dongying Han, Na Zhao,Peiming Shi.Gear fault feature extraction and diagnosis method under different load excitation based on EMD, PSO-SVM and fractal box dimension[J]. Journal of Mechanical Science and Technology, 2019.(SCI收录)
(21)Dongying Han, Kai Liang,Peiming Shi.Intelligent fault diagnosis of rotating machinery based on deep learning with feature selection[J]. Low Frequency Noise, Vibration and Active Control, 2019.(EI收录)
(22)韩东颖,李培,安淑君,等. Multi-frequency weak signal detection based on wavelet transform and parameter compensation band-pass multi-stable stochastic resonance, Mechanical Systems and Signal Processing, 2016, 70-71: 995-1010. (SCI收录, ESI 1%高被引论文)
(23)韩东颖,魏世民,时培明,等. Damage Identification of a Derrick Steel Structure Based on the HHT Marginal Spectrum Amplitude Curvature Difference, Shock and Vibration, 2017.09, 1062949.(SCI收录)
(24)韩东颖,苏晓,时培明. Weak Fault Signal Detection of Rotating Machinery Based on Multistable Stochastic Resonance and VMD-AMD, Shock and Vibration, 2018.04, 4252438.(SCI收录)
(25)韩东颖,赵娜,时培明. A new fault diagnosis method based on deep belief network and support vector machine with Teager–Kaiser energy operator for bearings.Advances in Mechanical Engineering, 2017,9(12):1-11.(SCI收录)
(26)韩东颖,时培明,夏克伟. Nonlinear Torsional Vibration Dynamics Behaviors of Rolling Mill's Multi-DOF Main Drive System under Parametric Excitation. Journal of Applied Mathematics:2014.8,202686.(SCI收录)
(27)韩东颖,安淑君,时培明. A new weak fault diagnosis method based on multi-scale wavelet noise tuning cascaded multi-stable stochastic resonance, Journal of Vibroengineering, 2018, 20(1): 258-271.(SCI收录)
(28)Dongying Han,SuXiao,Peiming Shi.Stochastic resonance in multi-stable system driven by Lévy noise, Chinese Journal of Physics, 2018..(SCI收录)
(29)韩东颖,王志磊,朱进礼.基于时变可靠度和疲劳效应的井架钢结构剩余寿命分析.计量学报, 2015, 36(5): 491-495.1A
(30)韩东颖,时培明.基于频率和当量损伤系数的井架钢结构损伤识别.工程力学, 2011, 28(9): 109-114.(1B, EI收录)
(31)韩东颖,丁雪娟,时培明.基于自适应变尺度频移带通随机共振降噪的EMD多频微弱信号检测.机械工程学报, 2013, 49(8):10-18.(1A, EI收录)
(32)韩东颖,李庚,时培明.基于EMD和分形盒维数的旋转机械耦合故障诊断方法研究.振动与冲击, 2013, 32(15): 209-214.(1B,EI收录)
(33)韩东颖,周国强,李子丰,等.基于振动测试参数的井架钢结构极限承载力预测.振动与冲击,2011, 30(1): 106-110.(1B, EI收录)
(34)韩东颖,时培明,赵东伟.板带轧机机电传动系统参数非线性扭振鲁棒控制研究.振动与冲击, 2016,35(12): 1-6, 21.(1B,EI收录)
(35)韩东颖,时培明,赵东伟.非线性轧机机电系统电机速度鲁棒非脆弱控制.电机与控制学报, 2015,(03):82-87,95.(1B, EI收录)
(36)Dongying Han, Peiming Shi, etc. Safety Evaluation of Marine Derrick Steel Structures Based on Dynamic Measurement and Updated Finite Element Model. Procedia Engineering. 2011(26):1891-1900.(EI收录)
(37)Dongying Han, Zhilei Wang, etc. Study on direct updating theory for derrick steel structures with damage and defacements. Proceedings of 2012 International Conference on Quality, Reliability, Risk, Maintenance, and Safety, 2012, 823-827.(EI收录)
(38)Han, Dongying, Luo, Gen, Wei, Shimin, etc. Random reliability analysis of oil derrick based on APDL second development. 2015 International Field Exploration and Development Conference, 20150593.(EI收录)
(39)Dongying Han, Yanlong Sun, Xiao Su, etc. Feature extraction method for weak mechanical fault signal based on double coupled duffing oscillator and emd, 2016 IEEE 13th international conference on signal processing, 2016, 863.(EI收录)
(40)Dongying Han, Cuijiao Su , Peiming Shi. Research on fault diagnosis method of rolling bearing based on AMD and LabVIEW, The 24th Vibroengineering Conference, 2016, 17254.(EI收录)
(41)Dongying Han, Yanlong Sun, Peiming Shi.Research on weak signal feature extraction method based on double Coupled Duffing Oscillator, Structural Health Monitoring,2017, 2738-2744.(EI收录)
(42)韩东颖,时培明.基于频率和BP神经网络的井架钢结构损伤识别.中国安全科学学报,2012,22(8):118-123.(核心)
(43)韩东颖,李子丰,陈国春,等.多工况作用下井口套管头仿真计算及安全性分析,石油钻采工艺, 2015,37(5):58-62.(核心)
(44)韩东颖,吴畏.井架钢结构在风载工况下的安全性分析.广西大学学报:自然科学版, 2013, 38(6): 1292-1299.(核心)
(45)韩东颖,时培明,等.基于单位载荷变形差值曲率的承载钢结构损伤识别.燕山大学学报,2012,36(6):556-560.(核心)
(46)Dongying Han, Xinjun Yang, etc. Sensitivity analysis of dynamic characteristics of derrick steel structures. 2012 International conference on electric technology and civil engineering, 2012,3460-3463.
(47)Dongying Han, Xujia Li, etc. The model updating theory research of derrick steel structures based on sensitivity analysis. 2012 International conference of computer and information science, safety engineering, 2012,vol5,143-146.
(48)韩东颖,李子丰,周国强.在役石油钻机井架极限承载仿真模型研究.石油学报, 2007, 28(2): 120-123, 128.(EI收录)
(49)韩东颖,李子丰,周国强.基于模型局部修正的井架钢结构极限承载力分析.工程力学, 2007, 24(10): 175-179, 185.(EI收录)
(50)李子丰,韩东颖,周国强.复杂承载钢结构模态参数识别与综合性能评价.应用力学学报. 2008, 25(2): 678-682.(中文核心)
(51)韩东颖,周国强,李子丰.含损伤缺陷的大型钢结构架极限承载预测方法研究.计量学报, 2007, 28(4): 370-374.(1A,中文核心)
(52)韩东颖,李子丰,周国强.基于单位载荷变形差值曲率的复杂结构损伤识别法.振动、测试与诊断, 2007, 27(9)s: 254-256.
(53)Li Zifeng, Han Dongying, Zhou Guoqiang. Ultimate load-carrying capacity forecast of derrick steel structures.仪器仪表学报, 2007, 28(4)s4: 636-637.(EI收录)
(54)韩东颖,周国强,李子丰.含损伤缺陷的钻机井架安全承载能力评定方法研究.天然气工业, 2007, 27(1): 81-84.(中文核心)
(55)韩东颖,李子丰,周国强.基于振动参数的钻井井架安全承载力评定.石油钻探技术, 2006, 34(6): 48-51.(中文核心)
(56)Han Dongying, Zhou Guoqiang, Li Zifeng. Ultimate bearing capacity analysis of oil field drilling masts. Petroleum Science, 2005, 2(3): 33-36.
(57)韩东颖,周国强,李子丰.基于应力和当量损伤系数的石油井架损伤识别.石油钻采工艺, 2008, 30(1):29-32(中文核心)
(58)韩东颖,李子丰,周国强.基于模型修正的钻机井架承载力评定方法研究.第五届博士生学术年会论文集
(59)周国强,韩东颖.井架模型极限承载性能分析.大庆石油学院学报, 2005, 29(3): 50-52.(中文核心)
(60)周国强,韩东颖,郭奕珊.井架模型极限载荷试验.石油机械, 2005, 33(9): 9-11.(中文核心)
承担课程:
(1)《石油机械》 必修 48学时
(2)《工程热力学与传热学》 必修32学时
(3)《石油安全工程》研究生 学硕/专硕 选修24学时
(4)《人工举升理论》研究生 学硕/专硕 选修24学时
(5)《石油工程设计》研究生 学硕/专硕 选修/必修32学时 合上
教学项目及获奖信息:
(1)基于OBE与创新实践项目培育的工程热力学与传热学课程改革 课程规范化改革项目 校级立项2016年 主持
(2)基于“虚拟仿真平台”的多位一体化创新实践体系改革 河北省高等教育教学改革研究与实践项目 省级立项2017年 主持
(3)依托专业竞赛和学科交叉资源提高研究生实践和创新能力的培养体系改革研究生教学改革项目 校级立项2017年 主持
(4)2017年获燕山大学师德先进个人
(5) 2016年指导学生获全国大学生节能减排社会实践与科技竞赛全国三等奖,2021年、2022年指导学生获中国研究生能源装备大赛全国三等奖。
(6) 2014年中国石油工程设计大赛先进个人
(7) 2013年、2017年、2021年、2023年中国石油工程设计大赛优秀指导教师
入学年 级别 姓名
2024 硕士 宋少楠
2024 硕士 田启申
2024 硕士 郝玉强
2024 硕士 孔祥哲
2023 硕士 魏晓
2023 硕士 尹昕蕊
2023 硕士 朱志洲
2022 硕士 葛子轩
2022 硕士 景培桐
2022 硕士 张德凯
2021 硕士 葛文泰
2021 硕士 李岳峰
2021 硕士 王玉玺
2021 硕士 李可欣
2020 硕士 黄岩
2020 硕士 朱国庆
2020 硕士 曹立志
2019 硕士 邵晨
2019 硕士 田伟
2019 硕士 崔宇
2018 硕士 刘念
2018 硕士 刘义
2017 硕士 孔祥西
2017 硕士 罗皓
2016 硕士 徐迎宾
2016 硕士 田能源
2015 硕士 高辰子
2014 硕士 高凯
2014 硕士 王斌
2013 硕士 魏世民
2013 硕士 魏庆
2013 硕士 都春旺
2012 硕士 罗根
2012 硕士 吴畏
2012 硕士 王红波
2011 硕士 王志磊
2020 博士 田警辉
2021 博士 张宇
2022 博士 曹立志
2024 博士 葛子轩
(1)中国石油学会、河北省石油协会会员、中国振动工程协会会员
(2)Mechanical Systems and Signal Processing、Measurment、IEEE Access、振动与冲击、工程力学、计算力学学报等期刊审稿专家
(3)国家自然科学基金评审专家
(4)天津市自然科学基金评审专家
(5)中国研究生能源装备大赛评审专家、博士后创新创业大赛评审专家
(6)全国普通高等学校本科教育教学评估专家